Loading ...
Loading ...
Loading ...
81
The admin account cannot be deleted.
4.8.3 Peripheral Management
4.8.3.1 Configuring Heater
Step 1 Select >
System
>
Peripheral
>
Heater
.
Step 2 Select the heater type to be
Unit Device Heater
.
This is supported by some select models.
Step 3 Set the heating mode.
●
Auto
: Set the start temperature and stop temperature as the temperature range for
heater to start, and then click
Apply
. When the sensor temperature is in the range, then
heater works automatically.
●
Manual
: When you think it’s cold enough and you want to let the camera work in a
warm condition, you can select the mode to be
Manual
, click , and then click
Apply
.
Figure 4-71 Heater
Step 4 Click
Apply
.
4.8.3.2 Configuring Serial Port
Set the serial port of the external device.
Step 1 Select >
System
>
Peripheral
>
Serial Port
.
Step 2 Configure parameters.
Loading ...
Loading ...
Loading ...