Loading ...
Loading ...
Loading ...
27
Table 4-7 Description of day and night parameters
Parameter Description
Type
Select the type from
Electronic
and
ICR
.
●
ICR: Switch day and night through a light filter.
●
Electronic: Switch day and night through the image processing
methods.
Mode
You can select device display mode from
Color
,
Auto
, and
B/W
.
Day/Night configuration is independent from profile management
configuration.
●
Color
: The system displays color image.
●
Auto
: The system switches between color and black-and-white
display according to the actual condition.
●
B/W
: The system displays black-and-white image.
Sensitivity
This configuration is available only when you set
Auto
in
Mode
.
You can configure camera sensitivity when switching between color
and black-and-white mode.
Delay
This configuration is available only when you set
Auto
in
Mode
.
You can configure the delay when camera switching between color and
black-and-white mode. The lower the value is, the faster the camera
switches between color and black-and-white mode.
Step 3 Click
Apply
.
4.3.1.1.7 Configuring Illuminator Parameters
This configuration is available only when the device is equipped with illuminator.
Step 1 Select >
Camera
>
Image
>
Illuminator
.
Step 2 Configure illuminator parameters.
Figure 4-11 illuminator
Table 4-8 Description of illuminator parameters
Parameter Description
Mode
Manual
Adjust the brightness of illuminator manually, and
then the system will supply illuminator to the
image accordingly.
Auto
The system adjusts the illuminator intensity
according to the ambient lighting condition.
Step 3 Click
Apply
.
Loading ...
Loading ...
Loading ...