Loading ...
Loading ...
Loading ...
73
Figure 4-61 Disarming
Step 3 (Optional) Enable disarming by period and set the disarming period.
Step 4 (Optional) Set arming periods. For details, see "4.6.1.2 Alarm Linkage".
If the exiting schedules cannot meet the scene requirement, you can click
Add Schedule
to add a new schedule. For details, see "4.6.1.2.1 Adding schedule".
Green indicates that the period with disarming enable.
Step 5 Select alarm linkage actions as needed.
You can select the linkage action from
Alarm-out Port
,
Send Email
,
Audio Linkage
,
Warning Light
.
The system will not perform the selected linkage actions when an alarm is triggered; and
perform the unselected linkage actions when an alarm is triggered.
Step 6 Click
Apply
.
4.7 Managing Storage
Displays the information of the local SD card. You can set it as read only or read & write; you can also
hot swap and format SD card.
Functions might vary with different models.
Select >
Storage
.
●
Click
Read-Only
, and then the SD card is set to read only.
●
Click
Read & Write
, and then the SD card is set to read & write.
●
Click
Hot Swap
, and then you can pull out the SD card.
●
Click
Format
, and you can format the SD card.
When reading SD card on PC, if the SD card capacity is much less than the nominal capacity, you
need to format the SD card. Then the data in SD card will be cleared, and the SD card is formatted
to be private file system. The private file system can greatly improve SD card multimedia file
read/write performance. Download Diskmanager from Toolbox to read the SD card. For details,
contact after-sales technicians.
Loading ...
Loading ...
Loading ...