Loading ...
Loading ...
Loading ...
114
will be triggered.
Background Information
Smoking detection and IVS cannot be enabled at the same time.
Procedure
Step 1 Select
AI
>
AI Config
>
Smart Plan
.
Step 2 Click next to
Smoking Detection
in
CAM 2
.
Step 3 Click
Next
.
Step 4 Click the
Global Config
tab.
Step 5 Add a detection area or an exclusion area.
1) Click to draw a detected area on surveillance image. The whole image is the
detection area by default, drag corners of the detection area to adjust the area.
2) Click to draw an exclusion area on surveillance image. Right-click to finish drawing.
●
Select the exclusion area, and then click to delete the exclusion area.
●
An exclusion area takes effect only when it has been drawn in the detection area
●
Multiple exclusion areas can be drawn in the detected area.
Step 6 Click
Apply
.
8.3.2 Rule Configuration
Configure the rule for smoking detection, such as drawing rules and set linkage actions.
Prerequisites
You have finished global configuration. For details, see "8.2.1 Global Configuration".
Procedure
Step 1 Select
AI
>
AI Config
>
Smart Plan
.
Step 2 Click next to
Smoking Detection
to enable the call detection function.
Step 3 Click
Next
.
Step 4 Click the
Rule Config
tab.
Step 5 Click to enable the call detection function.
Step 6 Click to draw a detected area on surveillance image. The whole image is the detection
area by default, drag corners of the detection area to adjust the area.
Step 7 (Optional) Click other icons at the right side of the image to filter targets in the image.
●
Click to draw the minimum size of the target, and click to draw the
maximum size of the target. Only when the target size is between the maximum size
and the minimum size, can the alarm be triggered.
Step 8 Set the interval and sensitivity.
●
Interval: The time that smoking behavior lasts. When the camera detects the smoking
time beyond the configured value, an alarm is triggered.
●
Sensitivity: The larger the value is, the more sensitive the smoking detection is.
However, setting the value too large might cause false alarm.
Loading ...
Loading ...
Loading ...