Loading ...
Loading ...
Loading ...
123
and draw a new one.
●
You can draw 12 rule at most.
Step 4 Click
Alarm
to configure the parameters.
Table 9-1 Alarm parameter description
Parameter Description
Config Enable the configuration.
Target Radiation
Coefficient
Radiation coefficient of targets that are shot by this Camera. Ranges
from 0.5–1.
Target Distance
Distance from the camera to targets that are shot. Ranges from 0–10000
m.
Target Reflection
Temperature
Temperature of targets that are shot by this Camera. Ranges from -50 °C
to 327.7 °C.
Alarm-out Port Enable alarm out.
Alarm Condition
Set the alarm condition: Alarm result + alarm condition + Alarm
threshold temperature/temperature slope.
●
Alarm result: The display items of temperature.
◇
Select spot as the drawing tool, and average temperature and
temperature slope will be displayed.
◇
Select line, rectangle, ellipse or polygon as the drawing tool, and
maximum/minimum/average temperature, temperature slope
and temperature difference are displayed.
Temperature difference means the difference between
maximum and minimum temperatures under rules that you
have set; temperature slope means temperature’s varying rate
under rules you have set.
●
Alarm condition:
Below
,
Match
and
Above
.
●
Alarm threshold temperature: The temperature that triggers alarm,
and it ranges from–40 °C to 550 °C.
You can set this value when you select alarm result as
Max
,
Min
,
Average Temperature
, or
Temperature Difference
.
●
Temperature slope: The temperature difference in each minute, and
it ranges from–600 °C/min to 600 °C/min.
You can set this value when you select
Alarm Results
as
Slope
.
Temperature Error
Set a temperature error value and if the alarm threshold temperature or
temperature slope is within the value you have set, linked alarms will
still be triggered. Ranges from–10 °C to 10 °C.
Temperature
Duration
You can set a lasting time of abnormal temperature after which alarms
will be triggered. Ranges from 0–1000 s.
Step 5 Click
Apply
.
After configuration, you can view the temperature change under the configured rules on
the live image.
Loading ...
Loading ...
Loading ...