Loading ...
Loading ...
Loading ...
75
Figure 4-64 Date and time
Table 4-27 Description of date and time parameters
Parameter Description
Date Format Configure the date format.
Time
●
Manually Setting
: Configure the parameters manually.
●
NTP
: When selecting NTP, the system then syncs time with the
internet server in real time.
You can also enter the IP address, time zone, port, and interval of a
PC which installed NTP server to use NTP.
Time Format
●
Configure the display format of date and time. You can select from
12-Hour
or
24-Hour
.
Time Zone Configure the time zone that the camera is at.
Current Time
Configure system time.
Click
Sync PC
, and the system time changes to the PC time.
DST
Enable DST as needed.
Click , and configure start time and end time of DST with
Date
or
Week
.
Step 3 Click
Apply
.
4.8.1.3 Positioning System
Enter the camera’s location information (longitude, latitude, altitude, and installation height) to
remind you where your camera locates.
Also, automatically sent to the management platform, the location information can be viewed on
the platform to help the platform operator track your camera.
Step 1 Select >
System
>
General
>
Positioning System
.
Step 2 Enter the longitude, latitude, altitude, and installation height of the camera.
Loading ...
Loading ...
Loading ...