Loading ...
Loading ...
Loading ...
INTRODUCTION OF CONTROL PANEL
AFTER POWER-UP
As soon as the bread maker is plugged into the power supply, a beep will be heard
and “3:00” appears on the display after a short time. But the two dots between the
“3” and “00” don’t flash constantly. The arrow points to 800g and MEDIUM. These
are the default settings.
START/STOP
The button is used for starting and stopping the selected baking program.
To start a program, press the START/STOP button once. A short beep will be heard
and the two dots in the LCD begin to flash, the working light illuminates, and the
program starts. Any other button is inactivated except the START/STOP button
after a program has begun. This feature will help to prevent any unintentional
disruption to the operation of program.
To stop the program, press the START/STOP button for approx. 2 seconds, then a
beep will be heard, the working light will be disappear, it means that the program
has been switched off.
PAUSE FUNCTION
After starting a program, you can press START/STOP button once to interrupt at
any time, the operation will be paused but the setting will be memorized, the
working time will be flashed on the LCD. Touch START/STOP button again or
within 10 min without touching any button, the program will continue.
PROGRAMS
Used for setting different programs. Each time it is pressed (accompanied by a
short beep) the program will change. Press the button continuously, the 12
programs will be cycled to show on the LCD display. Select your desired program.
The functions of the 12 programs will be explained below.
1. Basic: kneading, rise and baking normal bread. You may also add ingredients to
increase flavor.
2. French: kneading, rise and baking within a longer rise time. The bread baked in
COLOR
5/37
Loading ...
Loading ...
Loading ...