Loading ...
Loading ...
Loading ...
7www.senixtools.com
YOU EXPERIENCE ANY OF THESE
SYMPTOMS, SEEK FRESH AIR AND
MEDICAL ATTENTION IMMEDIATELY.
BURNS AND FIRES
The muffler, muffler guard and other
parts of the engine become extremely
hot during the operation of the engine.
These parts remain extremely hot after
the engine has stopped.
Prevention of Burns and Fires
• Never remove the muffler guard from
the engine.
• Never touch the muffler guard
because it is extremely hot and will
cause severe burns.
• Never touch parts of the engine that
become hot after operation.
• Always keep materials and debris
away from muffler guard and other hot
parts of the engine to avoid fires.
CHILDREN AND BYSTANDERS
Tragic accidents can occur if the
operator is not alert to the presence
of children and/or bystanders. Never
assume that others will remain where
you last saw them.
• Keep the area of operation clear of all
persons, especially small children and
pets. Keep children under the watchful
care of a responsible adult.
• Be alert and turn machine off if
children enter the area.
• Before and while moving backwards,
look behind and down for small
children.
• Never allow children to operate the
machine.
• Use extra care when approaching
blind corners, shrubs, trees, or other
objects that may obscure vision.
WARNING:
HOT GASES ARE A NORMAL BY-
PRODUCT OF A FUNCTIONING
INTERNAL COMBUSTION ENGINE.
FOLLOW ALL SAFETY INSTRUCTIONS
TO PREVENT BURNS AND FIRES.
SERVICE
• Always stop the engine whenever you
leave the equipment, before cleaning,
repairing or inspecting the unit.
Engine should be turned off and cool.
Never make adjustments or repairs
with the engine (motor) running.
• Always wear eye protection when you
make adjustments or repairs.
• Keep all nuts and bolts tight and keep
equipment in good condition.
• Never tamper with safety devices.
Check their proper operation regularly.
• When servicing or repairing the
machine, do not tip the machine over
or up unless specifically instructed
to do so in this manual. Service and
repair procedures can be done with
the machine in an upright position.
Some procedures will be easier if the
machine is lifted on a raised platform
or working surface.
• To reduce fire hazard, keep machine
free of grass, leaves or other debris
build-up. Clean up oil or fuel spillage.
Allow machine to cool before storing.
• Stop and inspect the equipment if you
strike an object. Repair, if necessary,
before restarting.
• Clean and replace safety and
instruction decals as necessary.
• Inspect machine before storage. When
not in use, press and hold the On/
Off switch in the off position till the
engine stops. The switch will return
to the on position automatically. And
store indoors in a dry place locked or
otherwise inaccessible to children.
• Use only original equipment parts for
the manufacturer including all nuts
and bolts.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...