Loading ...
Loading ...
Loading ...
11www.senixtools.com
This product requires assembly. Carefully remove the
product and any accessories from the box. Make sure
that all items listed in the packing list are included. In-
spect the product carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
WARNING:
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffo-
cation risk!
INSTALLING THE HANDLE BAR
The product must be fully assembled before operation!
Do not use a product that is only partly assembled or
assembled with damaged parts.
Follow the assembly instructions step-by-step and use
the pictures provided as a visual guide to easily assem-
ble the product!
Never start the engine before it is completely assem-
bled!
1. Set up the cultivator on flat and firm ground to ensure
safe and sturdy operating.
2. Align the holes in the middle handle bar (BB) with the
holes in the lower handle bar (M) and secure the con-
nection with the bolts (AA), knobs (DD), and gaskets
(CC) (Fig. 1).
3. Align the holes in the upper handle bar (R) with the
holes in the middle handle bar (BB) and secure the
connection with the bolts (AA), knobs (DD), and gas-
kets (CC) (Fig. 2).
BB
CC
DD
AA
M
Fig. 1
R
BB
DD
CC
AA
Fig. 2
ASSEMBLY
4. Secure the cables with the cable clips (EE) (Fig. 3).
EE
EE
Fig. 3
ADDING OIL: INITIAL USE
CAUTION:
Attempting to start the engine before it has been pro-
perly filled with lubricant will result in equipment failure
not covered by the warranty.
WARNING:
Overfilling the crankcase may cause serious issues.
Check the oil level before each use. The importance
of maintaining the proper oil level cannot be overemp-
hasized. Change the oil according to the Maintenance
Schedule.
CAUTION:
Do not overfill. Overfilling the crankcase may cause ex-
cessive smoke, oil loss, and engine damage.
NOTE: Oil must be added before starting the unit.
NOTE: This unit comes with a 3.37 fluid oz. (100 ml
SAE 10W-30) container of oil.
1. Set the unit on a flat, level surface horizontally as
shown below (Fig. 4).
2. Unscrew the oil fill plug (Fig. 5).
3. Pour the 3.37 fluid oz. (100 ml) oil into the oil fill hole.
DO NOT overfill.
4. Insert the dipstick into the fill spout but do NOT screw
in. Remove dipstick and check the oil level.
5. When oil level is full, the oil will be between the up-
per limit and lower limit on the dipstick. If oil level is
below the lower limit, add oil until the fluid level rises
between the upper limit and lower limit on the dipstick
(Fig. 5).
NOTICE: Never add oil to the fuel tank. This unit has a
four-cycle engine. DO NOT mix oil with gasoline.
6. Wipe up any oil that may have spilled.
7. Reinstall the oil fill plug (Fig. 5).
Loading ...
Loading ...
Loading ...