Loading ...
Loading ...
Loading ...
19www.senixtools.com
1
0.60 mm - 0.80 mm
0.025 in. - 0.031 in.
STORAGE
Ь Never store a fueled unit where fumes may reach an
open flame or spark.
• Allow the engine to cool before storing.
• Lock up the unit to prevent unauthorized use or da-
mage.
• Store the unit in a dry, well-ventilated area.
• Store the unit out of the reach of children.
• Store the unit after cleaning the cutting blade.
Short-term Storage (1-2 weeks)
Store the unit in a horizontal position.
Long-term Storage
1. Remove the fuel cap, tip the unit and drain the fuel
into an approved container. Reinstall the fuel cap.
2. Start the engine and allow it to run until it stalls. This
ensures that all fuel has been drained from the car-
buretor.
3. Allow the engine to cool. Remove the spark plug and
put 5 drops of any high quality motor oil into the cy-
linder. Pull the starter rope slowly to distribute the oil.
Reinstall the spark plug.
4. Thoroughly clean the unit and inspect it for any loose
or damaged parts. Repair or replace damaged parts
and tighten loose screws, nuts or bolts.
5. Store the unit in a horizontal position.
Preparing the Unit for Use after Long-term Storage
1. Remove the spark plug. Tip the unit and drain all of
the oil from the cylinder into an approved container.
Reinstall the spark plug.
2. Change the oil. Refer to Changing the Oil.
NOTICE: Do not use fuel that has been stored for more
than 30 days. Dispose of old fuel and oil according to
federal, state and local regulations.
TRANSPORTATION
CAUTION:
Protect the product from any heavy impact or strong
vibrations which may occur during transportation in ve-
hicles.
Transport the unit in a horizontal position. If not possib-
le, transport the unit vertically with the engine at the top.
Secure the unit to prevent damage during transport.
Secure the unit to prevent it from slipping or falling over.
MAINTENANCE
Loading ...
Loading ...
Loading ...