Lexmark CX517DE User's Guide PDF Lexmark CX510, CX517

Loading ...

Memory full, cannot print faxes

From the control panel, do either of the following:

• Tou ch Continue holding faxes without printing to clear the message.

• Tou ch Attempt to print to restart the printer and continue printing.

Network [x] software error [54]

Try one or more of the following:

• From the printer control panel, touch Continue to continue printing.

• Turn o the printer, wait for about 10 seconds, and then turn the printer back on.

• Update the network ﬁrmware in the printer or print server. For more information, visit the Lexmark

support Web site at

http://support.lexmark.com.

No analog phone line connected to modem, fax is disabled.

Connect the printer to an analog phone line.

Non-Lexmark [supply type], see User's Guide [33.xy]

Note: The supply type can be a toner cartridge or the imaging kit.

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-

party supplies or parts may aect the performance, reliability, or life of the printer and its imaging

components. For more information, see

“Using genuine Lexmark parts and supplies” on page 211.

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable

results if third-party supplies or parts are used. Imaging component usage beyond the intended life may

damage your Lexmark printer or its associated components.

Warning—Potential Damage: Use of third-party supplies or parts can aect warranty coverage.

Damage caused by the use of third-party supplies or parts may not be covered by the warranty.

To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your

printer, press and hold

and the # button on the control panel simultaneously for 15 seconds.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and

install a genuine Lexmark supply or part.

Note: For the list of supported supplies, see the “Ordering supplies” section or go to

www.lexmark.com.

Not enough free space in ﬂash memory for resources [52]

Try one or more of the following:

• From the printer control panel, touch Continue to clear the message and continue printing.

• Delete fonts, macros, and other data stored in the ﬂash memory.

• Install a ﬂash memory card with larger capacity.

Troubleshooting 255

Loading ...

Lexmark CX517DE