Loading ...
Loading ...
Loading ...
Use To
Lock PS Startup Mode
On
O
Enable users to disable the SysStart file.
Note:
O
is the factory default setting.
Font Priority
Resident
Flash/Disk
Establish the font search order.
Notes:
• Resident is the factory default setting.
• This menu item appears only when a formatted, non‑defective
flash
memory option card or printer hard disk is installed.
• Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
• Job Buer Size must not be set to 100%.
Image Smoothing
On
O
Enhance the contrast and sharpness of low‑resolution images and
smoothen their color transitions.
Notes:
• O is the factory default setting.
• Image Smoothing has no eect on images that are 300 dpi or higher
in resolution.
PCL Emul menu
Use To
Font Source
Resident
Disk
Download
Flash
All
Specify the set of fonts used by the Font Name menu.
Notes:
• “Resident” is the factory default setting. Resident shows the factory
default set of fonts downloaded in the RAM.
• “Flash” and “Disk” settings show all fonts resident in that option.
• The flash option must be properly formatted and cannot be
read/write‑, write‑, or password‑protected.
• “Download” shows all the fonts downloaded in the RAM.
• “All” shows all fonts available to any option.
Font Name
Courier 10
Identify a specific font and the option where it is stored.
Note: Courier 10 is the factory default setting. Courier 10 shows the font
name, font ID, and the storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for
Download.
Understanding the printer menus 194
Loading ...
Loading ...
Loading ...