Loading ...
Loading ...
Loading ...
petsafe.com 7
How the System Works
A radio signal travels from the fence transmitter through a buried wire, marking the boundaries you wish to set for your dog. Your dog wears
a receiver collar that detects the signal at the boundary. As your dog approaches the boundary, the receiver issues a warning tone. If he
proceeds further, he receives a safe but startling static correction. While harmless, the correction will persuade him to stay in the containment
area you have established. Boundary flags are a temporary visual aid for your pet; remove them after training. This PetSafe
®
Rechargeable
In-Ground Fence
™
system has been proven safe, comfortable and effective for pets over 5 pounds.
Key Definitions
Fence Transmitter: Transmits the radio signal through the boundary wire.
Pet Area: The area within the warning zone where your pet can roam freely.
Warning Zone: The outer edge of the pet area where your pet’s receiver collar begins to
beep, warning him not to go into the static correction zone.
Static Correction Zone: The zone beyond the warning zone where your pet’s receiver collar
will emit a static correction, signaling him to return to the pet area.
Boundary Width: The combination of the warning zone and the static correction zone.
Surge Protector: Installed with the fence transmitter to protect it from lightning strikes and
power surges (USA and Canada only).
Receiver Collar: Receives the radio signal from the boundary wire.
Mode Button: Turns the receiver on/off and adjusts the level of static correction that your pet
receives outside the pet area.
Receiver Indicator Light: Indicates the level of correction at which the receiver collar is set.
This light also indicates battery status.
Contact Points: Delivers the safe static correction when your pet moves into the static
correction zone.
Receiver Charger: Charges the batteries inside the receiver collar.
Receiver Charge Jack: The connection point for charging the
receiver battery.
Power Jack: Where the power adaptor plugs into the fence transmitter.
Boundary Control Switch: The switch located on the fence transmitter
to adjust according to the length of boundary wire used.
Boundary Wire Terminals: Where the boundary wires connect to the
fence transmitter in order to complete a continuous loop.
Loop Indicator Light: Indicates that the boundary wire makes a
complete loop, enabling the signal to be transmitted.
Boundary Width Control: Adjusts the width of the warning and static
correction zones.
Note: Adjusting the knob does not change the level of static correction
on the receiver collar.
Fence
Transmitter
Static
Correction
Zone
Warning
Zone
Static
Correction
Zone
Warning
Zone
Pet
Area
Boundary
Width
Surge
Protector
with Power
Adapter
Receiver Charge Jack
Contact Points
Mode Button
Receiver
Indicator
Light
Receiver Collar Fence Transmitter
Boundary Control Switch
Boundary Wire
Terminals
Loop Indicator Light
Power Light
Power
Jack
Boundary Width
Control
Loading ...
Loading ...
Loading ...