Loading ...
Loading ...
Loading ...
petsafe.com 17
Set the Static Correction Level
The static correction levels increase in strength from 2 to 5, with level 1 being tone only (no correction), and level 5 being the maximum setting.
Refer to the table below to choose the static correction that best fits your pet.
1. Press and hold the mode button (7B) until the receiver collar illuminates a red light.
2. The receiver collar will then emit a series of red flashes representing the static correction level (e.g., 4 red flashes means level 4). You must
count the number of red flashes to determine the level setting.
3. Increase the static correction level by pressing and holding the mode button for 1 second after each series of flashes.
Note: Once you count 5 red flashes you are at level 5, and an additional hold will cycle the receiver collar back to level 1, which is tone only.
Static Correction Level Table
Static Correction Level Indicator Light Static Correction
1 1 red flash None—tone only
2 2 red flashes Low
3 3 red flashes Medium
4 4 red flashes Medium-high
5 5 red flashes High
Anti-Linger Prevention
The Anti-Linger Prevention feature keeps your dog from staying in the warning zone for long periods of time and draining the receiver collar
battery. Your dog will hear a warning tone when he reaches the warning zone. If your dog does not return to the pet area after 2 seconds, he
will receive a continuous static correction until he returns to the pet area.
Run Through Prevention
This system includes a unique Run Through Prevention feature so that your dog cannot “run through” the pet area without receiving an increased
level of static correction. The receiver collar automatically increases the static correction when your dog continues more than 20% of the way
through the pet fencing boundary width. For example, if the signal is detected 10 ft. from the wire and your dog enters the static correction
zone, this feature is activated when he is approximately 8 ft. from the boundary wire. Your dog will then receive a static correction that is at
an increased level corresponding to the static correction level setting on the receiver collar. The receiver collar is equipped to automatically
increase the level of static correction the longer your pet remains in the static correction zone if the collar is set at level 2 or above. The Run
Through Prevention sound is an intermittent tone.
Over Correction Protection
In the unlikely event that your pet “freezes” in the static correction zone, this feature limits the static correction duration to a maximum of 15
seconds. After 15 seconds, the static correction will stop and the green indicator light will stay on for 10 seconds. The receiver collar remains
locked out until your pet leaves the static correction zone.
Loading ...
Loading ...
Loading ...