PetSafe PIG00-14673 Rechargeable In-Ground Pet Fence for Dogs and Cats over 5lb - from the Parent Company of INVISIBLE FENCE Brand - Waterproof Collar with Tone and Static Correction

User Manual - Page 14

For PIG00-14673.

PDF File Manual, 36 pages, Read Online | Download pdf file

PIG00-14673 photo
Loading ...
Loading ...
Loading ...
+1 (800) 732-267714
Additional Boundary Wire
Extra spools of boundary wire can be purchased in lengths of
500 ft. per spool where you purchased the kit or through the
Customer Care Center.
Note: When adding boundary wire, it must act as a continuous loop.
The table on the right indicates the approximate length of boundary
wire needed for a square, single loop layout. The length will vary due
to the amount of twisted wire and the layout used.
Step 6: Connect the Wires
Now that the boundary wire has been positioned and spliced, the next
step is to connect the wire from inside to the surge protector, and then to
the transmitter.
1. Strip
3
8 in. of insulation from the 2 ends of the boundary wires in
order to connect them to the surge protector (6A).
2. Insert the stripped ends into the 2 left red connector holes on the
bottom of the surge protector labeled “LOOP” (6B). Make sure the
copper ends do not touch each other at the terminals.
3. Next, connect the surge protector to the fence transmitter with 2
twisted wires. Measure and cut 2 lengths of wire, then strip
3
8 in. of
insulation at both ends from each. Twist the 2 lengths together, with
at least 10–12 twists per ft., so the wires will not send out a signal.
4. Insert the 2 ends of the wires into the 2 black connectors at the
bottom of the surge protector labeled “TRANSMITTER.”
5. Next, insert the opposite ends of the twisted wire into the 2 red tabs
on the fence transmitter.
6. Turn the boundary width control knob to 10. This will set the
boundary width at the maximum width.
7. Plug the fence transmitter adaptor into the outlet on the surge
protector. You are now all connected (6C).
8. The power light and loop indicator light should come on. If this does
not happen, check out our troubleshooting section, watch one of
our instructional videos or give us a call.
Boundary
Wire
Transmitter Wires
6C
LOOP TRANSMITTER
BOUCLE ÉMETTEUR
Push Tab
Down to
Insert Wire
6B6A
Acres Feet of Wire Needed Number of Spools Needed
1
4 415 1
1
3 480 1
1
2 590 2
1 835 2
2 118 0 3
5 1870 4
10 2800 6
25 4500 9
Loading ...
Loading ...
Loading ...