Loading ...
Loading ...
Loading ...
petsafe.com 33
The power and loop indicator
lights are off.
• Check that the power adaptor is plugged into the fence transmitter.
• Check that the power adaptor is plugged in properly.
• If the system is plugged into a GFCI or RCD outlet, check to see if the circuit has been
tripped. Reset the GFCI or RCD circuit if required.
• Verify that the outlet is working properly by plugging in a known working item such as
a radio.
• Try plugging the fence transmitter into another 120-volt outlet.
• If the lights still do not come on, the fence transmitter and/or power adaptor needs to be
replaced. Contact the Customer Care Center.
• If a surge protector is installed, unplug the surge protector and plug the power adaptor
directly into the outlet. If the transmitter operates without the surge protector, contact the
Customer Care Center for a replacement surge protector.
The power light is on, the loop
indicator light is off, and the
fence transmitter loop alarm
is sounding.
• Check the boundary wire connections at the fence transmitter for proper connection.
• Check for broken or damaged boundary wires at the outside entry to the house.
• Perform the “System Test” (page 29) to determine if the fence transmitter or surge protector
needs to be replaced.
• If the fence transmitter is functioning properly, you have a break in your boundary wire. See
the “Wire Break Location Test” section (page 30) in this guide.
Terms of Use and Limitation of Liability
1. Terms of Use
The use of this product is subject to your acceptance without modification of the terms, conditions and notices contained with this product.
Use of this product implies acceptance of all such terms, conditions, and notices. If you do not wish to accept these terms, conditions, and
notices, please return the product, unused, in its original packaging and at your own cost and risk to the relevant Customer Care location
together with proof of purchase for a full refund.
2. Proper Use
Proper Use includes, without limitation, reviewing the entire Product Manual and any specific safety information statements. The specific
temperament or size/weight of your pet may not be suitable for this product. If you are unsure whether this product is appropriate for your
pet, please consult your veterinarian or certified trainer prior to use. For products used with pets where training is desired, Radio Systems
Corporation recommends that these training products are not used if your pet is aggressive and accepts no liability for determining suitability
in individual cases.
3. No Unlawful or Prohibited Use
This product is designed for use with pets only. This product is not intended to harm, injure or provoke. Using this product in a way that is not
intended could result in violation of Federal, State or local laws.
4. Limitation of Liability
In no event shall Radio Systems Corporation or any of its associated companies be liable for (i) any direct, indirect, punitive, incidental,
special or consequential damage and/or (ii) any loss or damages whatsoever arising out of or connected with the use or misuse of this
product. The Purchaser assumes all risks and liability from the use of this product to the fullest extent permissible by law.
5. Modification of Terms and Conditions
Radio Systems Corporation reserves the right to change the terms, conditions and notices governing this product from time to time. If such
changes have been notified to you prior to your use of this product, they shall be binding on you as if incorporated.
Loading ...
Loading ...
Loading ...