B160-001-CSI Owner's Manual

Loading ...

Product Features

• Extends and distributes audio/video, serial and IR control signals over

Cat5/Cat6 cabling.

• Models available with Component Video + Stereo Audio, DisplayPort,

HDMI**, and VGA + Stereo Audio.

• Converts source video to an IP-based signal that can be transmitted to

and distributed through a network switch.

• Transmitters can be located up to 328 ft. (100 m) from the switch,

with an additional 328 ft. (100 m) between the switch and the receiver,

for a total distance of 656 ft. (200 m).

• Can also be used in a point-to-point installation where the transmitter

directly connects to a receiver up to 328 ft. (100 m) away.

• Designed for managed network switches with IGMP, which allow login and

remote management via the switch interface.

• Video source can be sent to any analog or digital display (e.g. Component

Video to HDMI, VGA to HDMI, HDMI to DisplayPort, HDMI to HDMI).

• Display a single source on a single monitor or distribute a single signal to

multiple monitors.

• B160-200-HSI and B160-201-HSI receiver units include two HDMI

output ports for connection of two monitors.

• Connect up to 64 transmitters and 255 receivers in a single managed

switch installation.

• Utilizes H.264 video compression standard.

• Extends IR control signals that control a source

(such as a Blu-ray™player) from a remote display.

• Uses a 20 kHz to 60 kHz IR frequency.

• Supports RS-232 Serial baud rates up to 57600 bps.

• VGA video models support video resolutions up to 1920 x 1440,

including 1080p.

• DisplayPort and HDMI models support video resolutions up to

1920 x 1080 (1080p).

Loading ...

Owner's Manual - Page 4