B160-001-CSI Owner's Manual

Loading ...

Point-to-Multipoint Installation –

Managed Switch with IGMP

Notes:

• Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6

cable. Using stranded wire cable or cable with a gauge (AWG) size higher than

recommended will result in a shorter extension distance. Higher gauge cabling

(such as 26 AWG) has a limited transmission capability compared to lower-gauge

cabling. All Tripp Lite N202-Series Cat6 cables use 24 AWG solid wire cabling.

Extended lengths of 23 AWG solid wire Cat6a cable are available from Tripp Lite

as a custom order.

• B160-Series Audio/Video over IP Extenders are designed for use with a dedicated

network switch. Connecting IP Extenders to a switch used with other networking

equipment will result in degraded or non-functional product performance.

• The installation diagram on the next page shows HDMI transmitters and receivers

only, though any combination of transmitters and receivers (e.g. Component

Video, DisplayPort, HDMI, VGA) may be used. Up to 64 transmitters and 255

receivers can be connected in a single managed switch installation (the diagram

shown stops at a single 16-port network switch).

• The installation diagram on the next page shows only required connections.

Optional connections (such as the IR-IN and IR-OUT Cables) are not shown.

Loading ...

Owner's Manual - Page 10