Loading ...
Loading ...
Loading ...
11 - EN
WWW.SENIXTOOLS.COM
34. Pay attention to loosening and
overheating parts. If there is
any abnormality of the unit, stop
operation immediately and check
the unit carefully. If necessary,
have the unit serviced. Never
continue to operate a unit which
may be malfunctioning.
35. In start-up or during operation
of the engine, never touch hot
parts such as the mufer, the
high voltage wire, or the spark
plug.
36. After the engine has stopped,
the mufer is still hot. Never
place the unit in any places
where there are ammable
materials (dry grass, etc.),
combustible gasses, or
combustible liquids.
37. Pay special attention to
operation in the rain or just after
the rain as the ground may be
slippery.
38. If you slip or fall to the ground,
release the throttle lever
immediately.
39. Be careful not to drop the unit or
hit it against obstacles.
40. Before proceeding to adjust or
repair the unit, be sure to stop
the engine and detach the spark
plug.
41. When the machine is placed in
cap only after stopping the
engine. Do not smoke while
fueling or mixing fuel. Wipe
spilled fuel from the unit. Move
at least 3 m (10 ft) away from
the fueling source and site
before starting engine.
29. Stay clear of other workers
or bystanders by at least 15
meters/50 feet.
30. Whenever approaching an
operator of the unit, Be careful
not to startle or distract the
operator which can cause an
unsafe situation.
31. Never touch the nylon cutting
head or cutting blade whenever
the engine is running. If it is
necessary to adjust the protector
or nylon cutting head, make sure
to stop the engine and conrm
that the nylon cutting head or
blade has stopped running.
32. The engine should be turned off
when the unit is moved between
work areas.
33. Be careful not to hit the
nylon cutting head or blade
against stones, or the ground.
Unreasonable rough operation
will shorten the life of the unit
as well as create an unsafe
environment for yourself and
those around you.
Loading ...
Loading ...
Loading ...