Loading ...
Loading ...
Loading ...
8.16.4. Keys section
Global Velocity Curve: Sets the global velocity (can be used on all memories)
Custom Velocity Curve: Here you can select from preset velocity curves or use the following
5 parameters to define a Custom Velocity Curve:
• Min Velocity: This is the value sent when playing the keyboard as soft as possible
and defaults to a value of 1.
• Piano Velocity: This is an intermediate level and its default value is 12.
• Mezzo Velocity: This is an intermediate level and its default value is 42.
• Forte Velocity: This is an intermediate level and its default value is 95.
• Max Velocity: This is the level sent when playing the keyboard as hard as
possible and its default value is 127 .
Keys Aftertouch Curve: These parameters let you alter the aftertouch response of KeyLab
MkII’s keyboard. Three settings are available: Linear (Lin), Logarithmic (Log), or Exponential
(Exp).
Keys Aftertouch Min: Sets the minimum aftertouch value that will be generated by the
keyboard.
Keys Aftertouch Max: Sets the maximum aftertouch value that will be generated by the
keyboard.
8.16.5. MIDI Thru section
These two settings determine whether data will be passed between the MIDI and USB
connectors in both directions, only one direction, or not at all.
• MIDI IN to USB: A setting of On allows data received at the physical MIDI In
connector to be passed over USB to your DAW or another USB device. A setting
of Off prevents this.
• USB to MIDI Out: A setting of On allows data received via USB to be send to
external devices via the physical MIDI Out connector. A setting of Off prevents
this.
8.16.6. Continuous Pedal Calibration
♪: Each of the 5 pedal inputs has the same parameters in this section, so we'll cover them all at the
same time.
When the Mode of a Pedal is set to Control (as opposed to Switched Control), it is possible
to adjust the input to work with a wide range of variable pedals.
• Pedal Min: sets the value to match the lower end of the resistor range
• Pedal Max: sets the value to match the upper end of the resistor range
8.17. Import and Export buttons
You can also Import and Export all of the Device Settings, which allows you to configure any
KeyLab MkII with your preferred settings at once. An exported Device Settings file carries
the extension .keylabMkII_ds.
81 Arturia - User Manual KeyLab MkII - MIDI Control Center
Loading ...
Loading ...
Loading ...