Loading ...
Loading ...
Loading ...
8.7.3. Encoder RPN / NRPN
The encoders have the option to transmit Registered Parameter Numbers (RPN) or Non-
Registered Parameter Numbers (NRPN). These are numbers that can be used by various
manufacturers to allow their proprietary parameters to be controlled by external devices.
Refer to the documentation of the target instrument to see if it can respond appropriately to
these commands.
• Option: Specify whether the encoder needs to transmit RPN or NRPN data.
• Channel: Select the MIDI channel output for the selected encoder, between 1 to
16. This can also be set to “User”, which will make the encoder output the RPN/
NRPN data to the MIDI channel selected for the MIDI Ch button [p.67].
• RPN / NRPN LSB: Defines the RPN/NRPN value for Least Significant Byte that the
encoder will send when activated. Click/drag the knob or enter a value between
0 and 127 in the field below.
• RPN / NRPN MSB: Defines the RPN/NRPN value for Most Significant Byte that the
encoder will send when activated. Click/drag the knob or enter a value between
0 and 127 in the field below.
8.8. Customize the Faders
There are 3 separate banks of faders, which are selected using the Bank tabs:
The Mode menu lets you choose between the 3 modes available for each fader. Each mode
contains a unique set of parameters:
8.8.1. Fader Off
Disables the fader. This can be used to prevent accidentally moving the fader when it is not
needed in the User preset.
8.8.2. Fader Control
This is the default mode for the fader, and it lets you customize how each fader responds
when used.
• Name: Lets you enter a custom name for the fader, which will be shown on the
display when the fader is used. The name can be a maximum of 12 characters
long.
• Option: This lets you set the fader’s function between a traditional Fader, and a
Drawbar for use with virtual organ instruments.
• Channel: Select the MIDI channel output for the selected fader, between 1 to 16.
This can also be set to “User”, which will make the fader output to the MIDI
channel selected for the MIDI Ch button [p.67].
Fader Bank 2 selected
Arturia - User Manual KeyLab MkII - MIDI Control Center 72
Loading ...
Loading ...
Loading ...