Loading ...
Loading ...
Loading ...
5.6.3.2. Keyboard split: User mode
To set the split point using the keyboard, first enter User Edit mode [p.47] by pressing and
holding the User button until it blinks. After that, here's the process:
• Press any key lower than the top octave of the keyboard
• Turn the center knob to select the SplitMode parameter page
• Click the knob to jump to the value field
• Turn the knob to change the value to On
• Click the knob again to return to the parameter selection field
• Turn the center knob to select the Split Point parameter page
• Click the knob to jump to the value field
• Turn the knob to change the split point value
• Click the knob to return to the parameter selection field, or move another control
to edit something else
• Remember to store the User preset to preserve the split point and any other
changes
♪: In User mode, Part 1 is on the
right
side of the split point and Part 2 is on the
left
side of the split
point. This is the opposite of the Split mode part assignments [p.32] in Analog Lab mode.
5.6.3.3. Keyboard shortcut chart
Here's a list of the 49 and 61 keyboard shortcuts:
Mode Name Button/key combination Function [2]
All [1] MIDI Ch
MIDI Ch + one of the 16 lowest
keys
Define the User MIDI channel
User Edit
[3]
Global
[p.21]
D key in upper octave
Settings for keyboard/pad/fader response,
etc.
Store E key in upper octave [2] Enter Store page to save User preset
Velo Curve F key in upper octave [2] Set response curve for the keyboard
Name F# key in upper octave [2] Enter names for encoders, faders
Mode G key in upper octave [2] Select control function or disable it (Off)
Option G# key in upper octave [2] Select control response (gate/toggle, etc.)
MIDI Ch Highest A key [2] Set MIDI channel for current control
CC Bb key in upper octave [2] Choose MIDI CC # or note number
Min LSB B key in upper octave [2] Set minimum range for current control
Max MSB Highest C key [2] Set maximum range for current control
[1] Analog Lab, DAW, User mode [2] Some shortcuts are not available for certain controls due
to feature differences. [3] To access these parameters, first hold the User mode button for 1
second to enter User Edit mode.
Arturia - User Manual KeyLab MkII - User mode 50
Loading ...
Loading ...
Loading ...