Loading ...
Loading ...
Loading ...
2.6. Analog Lab/DAW/User modes
Three large buttons below the center knob allow you to switch the KeyLab MkII between its
three major modes:
• Analog Lab: Configures the knobs and faders to control parameters in Analog
Lab, as indicated by the blue text beneath each control. The center knob, the
buttons around it, and the buttons under the faders are used to filter and select
presets.
• DAW: Changes most of the KeyLab MkII front panel into a control center for your
recording software.
• User: Use the center knob to select one of 10 presets, each with its own settings
for every control. These presets may be customized from the front panel [p.45] or
by using the MIDI Control Center [p.65].
USER presets let you configure your KeyLab MkII controls and parameters (Velocity Curves,
Knob Acceleration, MIDI In/Out settings, CV In/Out settings,...). These parameters will also
affect the DAW and Analog Lab modes, letting you use your customisations in these modes.
However when using the Analog Lab or DAW memories, you will notice that a few controls
are hard mapped and cannot be overwritten by the USER presets.
• Analog Lab
◦ Sustain Pedal MIDI CC = 64 (Other Sustain Pedal parameters are
shared)
◦ Expression Pedal MIDI CC = 11 (Other Expression Pedal parameters
are shared)
◦ Mod Wheel MIDI CC = 1 (Other Mod Wheel parameters are shared)
◦ Encoder 1-9 are hard mapped (But Acceleration is shared)
◦ Fader 1-9 are hard mapped
◦ Select Button 1-9 are hard mapped
• DAW
◦ DAW Controls are hard mapped
◦ Encoder 1-9 are hard mapped (But Acceleration is shared)
◦ Fader 1-9 are hard mapped
◦ Select Button 1-9 are hard mapped
Arturia - User Manual KeyLab MkII - Overview 14
Loading ...
Loading ...
Loading ...