Loading ...
Loading ...
Loading ...
8.12.2. Pedal Control
This mode lets you customize how each pedal responds when used.
• Channel: Select the MIDI channel output for the selected pedal, between 1 to 16.
This can also be set to “User”, which will make the pedal output to the MIDI
channel selected for the MIDI Ch button [p.67].
• CC Number: The selected pedal can be set to transmit any MIDI CC# between
0-127. Many MIDI CC numbers are named within the drop-down menu to identify
standard uses.
• Min Value & Max Value: These parameters let you set the minimum and
maximum range of the selected pedal. Click and drag the knobs or enter a value
in the fields below them to set the range.
♪: The Continuous Pedal Calibration [p.81] parameter in the Device Settings section [p.79] allows you
to calibrate the physical response range for each pedal when its Mode is set to Control.
8.12.3. Pedal Switched Control
This option can be selected to use your pedal as a binary switch.
• Option: Choose between Gate and Toggle. Gate activates the pedal only when
pressed and deactivates it when released; Toggle activates the pedal when
pressed and deactivates it when it is pressed again.
• Channel: Select the MIDI channel output for the selected pedal, between 1 to 16.
This can also be set to “User”, which will make the pedal output to the MIDI
channel selected for the MIDI Ch button [p.67].
• CC Number: The selected pedal can be set to transmit any MIDI CC# between
0-127. Many MIDI CC numbers are named within the drop-down menu to identify
standard uses. For example, to use one of the pedals as a sustain pedal, set this
value to CC# 64.
• Off Value: When the pedal is released it doesn't have to return to a zero value,
although a zero value may be needed for some external devices or software
plug-ins to function properly. Click/drag the knob or enter a value in the field
below to set the minimum value the pedal will send when it is released.
• On Value: Click/drag the knob or enter a value in the field below to set the
maximum value the pedal will send when it is pressed.
♪: All 5 pedal inputs can detect the polarity of a foot switch when the KeyLab MkII is powered up. To
make sure this happens, set the desired pedal input to the Switched control mode. This is not a global
parameter, though, so if you want each User preset to be configured this way you will need to store this
setting separately in each User preset.
77 Arturia - User Manual KeyLab MkII - MIDI Control Center
Loading ...
Loading ...
Loading ...