Loading ...
Loading ...
Loading ...
9
ENG
Counter Cut-Off Sizes
USING YOUR APPLIANCE
1. To turn the device on and off, press and hold the on/off button until you hear a “beep”. When the unit is turned
on, the heat zone indicators shall be displayed.
2. The controls react to touching, so you do not need to apply any pressure to the controls.
3. Place a suitable pot, pan, etc. on the cooking area that you want to use.
4. Make sure that the base of the pot, pan, etc. you have placed and the surface of the cooking area are clean
and dry.
5. When you touch the heating zone selection control, the indicator next to the key you are touching shall flash.
6. Use the bottom, not the tip of your finger while using the device. You shall hear a “beep” at every touch.
7. Make sure that the touch controls are always clean and dry. Even a thin layer of water may make it difficult for
touch controls to work.
Note the following values while installing your stove or cutting the counter.
The gap on which the hob is placed must be cut in accordance with the dimensions of hob installation.
A 520 mm
B 300 mm
C 490 mm
D 260 mm
E
Min. 60 mm
F
Correct Wrong
Loading ...
Loading ...
Loading ...