Loading ...
Loading ...
Loading ...
17
ENG
To deactivate the boost function
Error Codes And Recommended Solutions
The table below provides the error codes, possible causes and recommended solutions for these codes.
1. Select the relevant hob where
the boost function shall be
deactivated.
2. Set the power level of the selected hob
between 1 and 9 using theminus (
)
and plus (
) buttons.
Error Code Possible Cause What to do
ER03
Pressing more than one buttons at the same
time.
Turn off the cooker. Clean the
touchscreen panel and try again after
turning the stove on.
ER22
Touch buttons are not detected by the circuit
or short circuit error on the button analysis.
Contact the manufacturer.
ER20 Flash error. Contact the manufacturer.
ER47
Communication wire is not installed
incorrectly or mid-level card is different.
Contact the manufacturer.
E2 Excessive temperature.
Restart cooking again after the hob is
cooled.
E3 IGBT error. Contact the manufacturer.
E5 / E6
Network frequency is out the permitted
frequency range.
Check the connection.
E8 Fan error. Contact the manufacturer.
E9 Temperature sensor error. Contact the manufacturer.
Loading ...
Loading ...
Loading ...