Loading ...
Loading ...
Loading ...
Settingup yourTV 7 5
Storing channels in memot T (optiona
AntennaAmplifier
Set this if the broadcast waves received are too weak or strong and the
picture is difficult to see. When this is set to On, the received broadcast
waves will be amplified.
Press the MENU button.1
2
Select Installation > Channel Tuning > Antenna Amplifier, and
then press the OK button.
3 Press the A/Y (arrow) buttons to select DTV or ATV.
To configure the settings for digital broadcasts select DTV.
To configure the settings for analog broadcasts select ATV.
4 Press the A/Y (arrow) buttons to select On or Off.
ManualTuning
After storing channelsin memory,you canmanually enterchannelsif the
channelnumber isknown.
1 Press the MENU button.
2 Select Installation > Channel Tuning > Manual Tuning, and then
press the OK button.
3 Use buttons 0-9 on the remote control to enter the channel number
(for example, 56).
4 Press the OK button to begin Manual Tuning.
The channels found are listed at the bottom of the screen.
Option: Description:
ATV Analogchannel
DTV Digitalchannel
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...