Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
4
SUPPLY VOLTAGE
• Do not place the welding machine inside a workpiece, for example in to a container
or a car.
• Do not install or place the welding machine on a wet surface.
• Change faulty cables immediately for they are life threatening and may cause re.
• Ensure that cables are not squeezed or in contact with sharp edges or a hat
workpiece.
WELDING CIRCUIT
• Insulate yourself from the welding circuit by using dry and undamaged protective
clothing.
• Do not work on a wet surface.
• Do not use damaged welding cables.
• Do not place the welding gun or earthing clamp on the welding machine or other
electrical device.
WELDING FUMES
• Make sure ventilation is sufficient.
• Take special precautions when welding metals containing lead, cadmium, zinc,
mercury or beryllium.
• Supply of sufficient clean air can also be ensured with the use of a fresh air mask.
MACHINE USE
The machine is delivered ready for operation without adjustments with 0.8 mm
diameter ller wire. If you use non-recommended ller wire, make sure that the
feed roll groove welding gun contact tip and machine polarity are suited for the
used wire size and type.
BEFORE IMPLEMENTATION
The products are packed to durable packages especially designed for them.
However, always make sure before use that products have not been damaged
during transportation. Check also that you have received the products you ordered
and the instruction manuals needed. Product packing material is recyclable.
Loading ...
Loading ...
Loading ...