Loading ...
Loading ...
Loading ...
1. Disconnect the machine from the mains.
2. Bend the rubber cover of the earthing cable's pole in such way that the cable can
be disconnected.
3. Remove poles tightening nuts and washers. Note the correct order of the washers!
4. Interchange the cables.
5. Install the washers in place and close the tightening nuts to spanner tightness.
6. Put the rubber cover of the earthing cable's pole rmly in place.
The rubber cover must always protect the earthing cable's pole.
CONTROLS AND INDICATOR LIGHTS
1. Overheating indicator light
2. Welding power control
3. Adjust wire feeding speed
4. Voltage regulation
www.SereneLifeHome.com
13
1
2
3
4
Front Panel
Loading ...
Loading ...
Loading ...