Loading ...
Loading ...
Loading ...
10
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
ChargerOperation
m
WARNING! Charge only 24V iON+ lithium-ion battery
pack with its compatible 24V iON+ lithium-ion charger. Other
types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger's AC/DC plug.
WhentoChargetheiON+24VBAT-LTE
Lithium-iONBattery
NOTE: The iON+ 24VBAT-LTE lithium-iON battery pack does
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before inserting the charger plug.
• Use the battery indicator lights to determine when to charge
your iON+ 24VBAT-LTE lithium-iON battery pack.
• You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
ChargingtheBattery
1. Press the push lock buttons on the battery to pull it out of
the equipment (Fig. 1).
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then, plug the
charger adapter into an appropriate AC power outlet.
Connect the charger plug into the charge socket of the
battery to start charging (Fig. 2).
3. The battery will take approximately 5 hours to charge.
The battery indicator LEDs will twinkle and illuminate one
by one during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery.
mWARNING! Thischargerdoesnotautomatically
turnowhenthebatteryisfullycharged.Please take care
nottoleavethebatterypluggedintothecharger.Switch
oorunplugthechargeratthemainswhenchargingis
complete.
4. Timely recharging of the battery will help prolong the
battery's life.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Assembly
m
WARNING! Do not attempt to operate the generator
until assembly is complete. Failure to comply could result in
possible serious personal injury. Do not put lubricant in the
generator before installing the feet and wheels.
Battery
Push lock
button
Fig.1
Fig.2
Battery
indicators
Loading ...
Loading ...
Loading ...