Loading ...
Loading ...
Loading ...
Operation
53
Refilling the water
If there is not enough water in the
container while a cooking process
involving moisture is in progress, a
buzzer will sound and the display will
prompt you to refill the container with
fresh water.
Risk of injury caused by hot
steam.
When using a cooking process
involving steam, a lot of hot steam
can escape if the door is opened.
The steam can cause burns.
Step back and wait until the hot
steam has dissipated.
Fill a suitable container with the
required amount of fresh water and
follow the instructions on the display
(see “Operation – Drawing in water”).
The heating-up phase restarts and the
cooking process is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the sensor control to
change the values or settings for this
programme.
Select the sensor control.
Depending on the function, the
following settings appear:
- Temperature
- Duration
- Finish at
- Start at
- Booster
- Pre-heat
- Rapid cooling phase
- Keeping warm
- Crisp function
Changing values and settings
Select the desired value or setting
and confirm withOK.
Change the value or setting and
confirm withOK.
The cooking programme will restart with
the new values and settings.
Loading ...
Loading ...
Loading ...