Loading ...
Loading ...
Loading ...
Settings
45
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A message will appear in your
combination steam oven display if a
software update is available.
You can install the update immediately
or postpone this until later. When the
combination steam oven is switched on
again, you will be reminded about the
update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the combination steam
oven off during the update.
Otherwise, the update will be aborted
and will not be installed.
- Some software updates can only be
carried out by the Miele Customer
Service Department.
Software version
The software version is intended for the
Miele Customer Service Department.
You do not need this information for
domestic use.
Showroom programme
This function enables the combination
steam oven to be demonstrated in
showrooms without heating up. This
setting is not needed for domestic use.
Demo mode
If you have demo mode activated,
Demo mode is activated. The appliance will
not heat up will appear when you
switch the combination steam oven
on.
- On
Touch the OKsensor control for at
least 4seconds to activate demo
mode.
- Off
Touch the OKsensor control for at
least 4seconds to deactivate demo
mode. You can use the combination
steam oven as normal.
Factory default
- Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
- User programmes
All User programmes will be deleted.
- Recommended temperatures
Any recommended temperatures that
have been changed will be reset to
the factory default settings.
Loading ...
Loading ...
Loading ...