Loading ...
Loading ...
Loading ...
3029
8. Other Functions
8.1 Automatic Sleep
Mode Guide
If the machine is not in use for 5m-
in after milk frothing, it will also
enter the sleep mode. Press the
ON/OFF button and the button will
flash. The temperature is still high
NOTE
at this point, if you want to cont-
inue brewing coffee, refer to "8.3
High-temperature Alarm Guide".
- If there is no any operation after 5
minutes, the machine will beep for a
while and all button’s light will be
turned off and the machine will pass
to sleep mode.
8. Other Functions
- To reactivate the machine, press the
ON/OFF button, and the ON/OFF bu-
tton starts to blink blue light slowly,
other buttons don't light up.
- When the machine has reached the
correct temperature, the ON/OFF
button light will stop flashing and all
button lights on the control panel will
illuminate, the machine is at the
READY state.
- Long press the ON/OFF button for 2
seconds, the machine will be switc-
hed off.
Step 1 - Place a cup
under the froth
nozzle.
Step 2 - Turn the Steam/water knob to
the steam“ ” position to release
water out for making the machine co-
ol down.
- Wait the 4 buttons are solid on, the
machine will return to the READY state.
Step 3 - Turn the Steam/water Knob to
the standby position. Now, the mac-
hine is ready for brewing coffee.
8.2 Water Shortage
Guide
- During the brew, if the water tank is
out of water, the machine’s 4 butto-
ns(ON/OFF button, single cup button,
double cup button, steam button) will
blink blue light simultaneously and
the machine will automatically stop
brewing.
NOTE
After 30 seconds without any op-
eration, the blue light of the ON/-
OFF button is solid on, and the lig-
hts of other buttons are off.
Cool the Machine for Making
Espresso
8.4 Button Sound
Setting Guide
Step 1 - Press any button to return the
machine to the READY state. Then refill
the water tank with clean water imm-
ediately.
8.3 High-temperature
Alarm Guide
Step 2 - Remove the portafilter and
clear the coffee puck, and don't brew
thecoffee puck again.
Step 3 - Put a cup under the steam wand.
Turn the steam /water knob and brew
some water to refill the inner boiler. After
that, the machine is ready for use again.
NOTE
Due to the water shortage in the
portafilter, the machine will have
high temperature and high pressure,
so we recommend you operate by
following the steps below:
If you accidentally press the steam bu-
tton or immediately brew coffee after
steaming, the temperature will be too
high, and it is not suitable for brewing
coffee, there will be a high-temperature
alarm by pressing the Single cup button
or Double cup button, at this point,
the Single cup button and Double cup
button are blinking blue light quickly,
at the same time the ON/OFF button is
blinking red light quickly.
A beep is emitted to confirm each bu-
tton press. These button sounds can
be switched off. The beeps emitted
after the brewing, warming processes,
Loading ...
Loading ...
Loading ...