Loading ...
Loading ...
Loading ...
Press the ON/OFF button within 15 seconds. The machine will make one
beep and be back to ready state without saving the new settings.
NOTE
5.4 Re-programming Shot Volume
Re-programming Single-shot Volume Mode
To begin re-programming, press & hold the Single/short cup button and Double/
long cup button for 3 seconds to enter the user-defined mode.The Single/short
cup button and Double/long cup button will flash to indicate the machine is
in re-programming mode.
12
Wait for the heating of
the machine to comp-
lete, that is, the blue
lights of the ON/OFF
Button, Single/short
Cup Button, Double/
long Cup Button, and
Steam Button are solid
on.
Press the Single/short
Cup Button to dispense
water once to clean the
coffee grounds around
the Group Head.
11 - After Each Use
2221
5. Espresso Making Guide5. Espresso Making Guide
56
78
Put it back.
Wipe down the machine
with a clean cloth.
Use a clean cloth to wipe
the coffee grounds left
on the Group Head.
Remove the drip tray
and pour away the
water.
Rinse the drip tray and
its cover with clean
water.
Wipe the drip tray with
a clean cloth.
12
Press Single/short cup
button once, the
espresso will start to
pour.
When you reach your
desired 1 shot volume,
press the Single/short
cup button again, the
espresso pour will stop.
(Shot Volume Range:
25-60mL)
34
Press the Steam button
within 15 seconds, the
ON/OFF button indicator
will flash blue light for 3
times and the machine
will have 3 beeps.
The new ONE CUP esp-
resso shot volume has
been saved and the
machine will return to
the READY state.
Re-programming Double-shot Volume Mode
12
Press Double/long cup
button once, the
espresso will start to
pour.
When you reach your
desired 2 shot volume,
press the Double/long
cup button. The espre-
sso pour will stop.(Shot
Volume Range: 50-130
mL)
34
Press the Steam button
within 15 seconds, the
ON/OFF button indicator
will flash blue light for 3
times and the machine
will have 3 beeps.
The new TWO CUP
espresso shot volume
has been saved and the
machine will return to
the READY state.
910
Align the marking dot
on the filter with the
groove on the portafilter
and put it back to the
portafilter.
Put the portafilter back
to the machine for next
use.
CENTRE
INSERT
43
Loading ...
Loading ...
Loading ...