Loading ...
Loading ...
Loading ...
Before you call forservice...
Troubleshooting -tips
Excessivesmoking
iiii i
Possible Causes What ToDo
Excessive soil.
• On models wifll touch pads, touch file Clear/Off pad.
On models with an OVEN TEMPknob, mrn it to OFE
Open the windows m rid the room of smoke. Wait until
the SELFCLEAN light goes of£ Wipe up the excess soil
and reset the clean cycle.
Oven door will not open Oven too hot. * Allow the oven to cool below locking temperature.
after a clean cycle
Oven not clean after Oven controls not properly set. * See the Using the self-cleaning oven section.
a clean cycle
Oven was heavily soiled. * Clean up hemy spillovers before starting the clean cycle.
Heavily soiled ovens may need to self-clean again or for
a longer period of time.
Oven door will not Oven is too hot. • Allow the oven to cool below locking temperature.
Do not lock the door with the door latch except when
with a door latch) using the self-clean feature.
Self clean light (on The OVEN TEMP knob has not * Set the OVEN TEMP knob to CLEAN. See the Using the
some models)blinks been set to CLEAN when the self-cleaning oven section.
when trying to set a latch was moved to the fight.
self clean cycle
The latch was not moved to the • Move the latch to the right as far as it will go. See the
fight when the OVEN TEMP knob Using the self-cleaning oven section.
was set to CLEAN.
Self clean light (on A power interruption occurred. * Turn the OVEN TEMP knob to OFFand move the latch
some models) blinks to the left as far as it will go. Reset the range controls
during self clean cycle to the desired settings. See the Using the self-cleaning
oven section.
"Door" appears in the
display (onsome models)
Self-cleaning cycle has been
selected but the latch handle
was not moved all the way
to the fight.
• Move the latch handle all the way to the right.
Latch handle was moved to the
fight but a program other than
self-cleaning was selected.
• Move the latch handle to the fight on b, when setting
the self-cleaning cycle.
"F---anda numberor
letter"flashin thedisplay
(onsomemodels)
On models with a door latch,
if a function error code appears
during the self-cleaning cycle,
check the oven door latch.
• The latch may have been moved, even if only slighfl);
flom the locked position. Make sure the latch is moved
to the fight as far as it will go.
You have a function error code. • Touch file Clear/Off pad. Allow the oven to cool for
one houL Put the oven back into operation.
If the function code repeats. • Disconnect all power m the range for 5 minums
and then reconnect poweL If the flmcfion error
code repeats, call for se_Mce.
48
Loading ...
Loading ...
Loading ...