Loading ...
Loading ...
Loading ...
Installation Instructions
-AWARNING!
ANTI-TIP DEVICE
• All ranges can tip.
• BURNSor other SERIOUS
INJURIEScan result.
• INSTALL and CHECKthe
ANTI-TIP bracket following
the instructions supplied
with the bracket.
Toreduce the risk of tipping the range, the rangemust
besecured by aproperly installedanti-tip bracket. See
installation instructionsshipped with the bracket for
completedetails before attemptingto install.
Tocheck ff the bracket is installed and engagedproperly,
carefully tip the rangeforward. Thebracket shouldstop the
range within 4inches. If f does not,the bracket must be
reinstalled.If the rangeis pulled from the wall for any
reason,always repeat this procedure to verify the range
is properly secured by the anti-tipbracket.
For free-standingor slide-in ranges,never completely
removethe leveling legs or the rangewill not besecured
to the anti-tip device properly.
ff you didnot receivean anti-tip bracket with your
purchase, call 1-800-626-8774to receive one at no cost(in
Canada,call 1-800-561-3344).Forinstallation instructions of
the bracket,visit GEAppliances.com(in Canada,
GEAppliances.ca).
• For your safety, never use your range for warming
or heating the room. Your oven and cooktop are
not designed to heat your kitchen. Top burners
should not be operated without cookwaze on the
grate. Such abuse could result in fire and damage
to your range and will void your warranty.
• Do not store or use combustible materials,
gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
Explosions or fires could result.
• Do not use oven for a storage area. Items stored in
the oven can ignite.
• Do not let cooking grease or other flammable
matezials accumulate in oz neaz the zange.
LOCATION
Do not locate the range where it may be subject to strong
drafts. Any openings in the floor or wall behind the range
should be sealed. Make sure the openings around the
base of the range that supply fresh air for combustion
and ventilation are not obstructed by carpeting or
woodwork.
Your zvmge, like many adler household items, is heaxy
and can settle into soft floor coverings such as cushioned
vinyl or cazpefing. Use care when moving the range
on this type of flooring. It is recommended that the
following simple and inexpensive insmzcfions be
followed to promct your tool
The range should be installed on a sheet of plywood
(or similar material). When the floor covering ends at
the flont of the range, the area that the range will rest
on should be built up with plywood m the same level or
higher than the floor covering.
This will allow file zvmge m be moved for cleaning
or sezMcing. Also, make sure your floor covering will
withstand 180°E (See the Installation Safetylnstructions
section.)
Make sure die wall coverings around your range can
withstand the heat generated (up m 200°F) by the zvmge.
(See the InstallationSafetyInstructionssection.)
IMPORTANT[
Remove all tape and packaging. Make sure the burners
are properly seated and level.
Lift up the cooktop (on models with standard twin
burners) and remove any packing material under it.
Take the accessory pack out of the oven and/or drawer.
Check to be sure that no range parts have come loose
during shipping.
37
Loading ...
Loading ...
Loading ...