Loading ...
Loading ...
Loading ...
Usingthe clock and timer.(o,son on odols; ge.com
Not all features are on all models.
Make sure the clock is set to the
correct time of day.
To Set the Clock
The clock must be set to tile correct time
of day for the automatic oven timing
flmctions to work properly. The time of day
cannot be changed during a delayed
cooking or a delayed self-cleaning cycle.
[Z] Touch the Clock pad twice.
[] Touch the ÷ or - pads.
If die + or - pads are not touched within
one minum after you much the Clockpad,
the display reverts m the original set6ng.
If this happens, much the Clockpad t_,vice
and reenmr the time of day.
[_] Touch the Start/Onpad until the time
of day shows in tile display. This enters
the time and starts the clock.
Tocheckthetime ofdaywhenthedisplayis
showingotherinformation,simplytouchthe
Clockpad. Thetimeof dayshowsuntilanotherpad
is touched.
To Turn Off the Clock Display
If you have several clocks in your kitchen,
you may wish to mrn off tile time of day
clock display on your range.
%
Touch tlle Clockpad once to turn
off tile time of day display: Akhough
you will not be able to see it, the clock
maintains the correct time of day.
[] Touch tile Clockpad twice to recall tile
clock display:
®
imer)
On / Off
The timer is a minute timer only.
The Clear/Off pad does not affect the
timer.
To Set the Timer
Thetimerdoesnotcontrolovenoperations.
Themaximumsettingonthetimeris 9 hours
and59minutes.
Ffl
Touch tile Kitchen Timer On/Off pad.
Touch the ÷ or - pads until the
amount of time you want shows in
the display. The maximum time that
can be enmred in minums is 59.
Times more than 59 minutes should
be changed m hours and minums.
If youmakea mistake,touchtheKitchenTimer
On/Offpadandbeginagain.
@
Touch die Start/Onpad. The dine will
start coun6ng down, aldlough
the displ W does not change un61 one
minum has passed.
When tile timer reaches :00, tlle
control will beep 3 times followed by
one beep eveD, 6 seconds until tile
Kitchen Timer 0n/0fipad is touched.
15
Loading ...
Loading ...
Loading ...