Loading ...
Loading ...
Loading ...
54
To perform Auto Detect in TPMS application
1. Tap the TPMS application button from the MaxiCOM Job Menu. The Vehicle
Menu displays.
2. Tap the VID button on the Top Toolbar to open the dropdown list.
Figure 6-2 VID Screen in TPMS Application
3. Select Auto Detect. Once the test vehicle is identified, the screen will display
the vehicle VIN. Tap OK at the bottom-right to confirm the vehicle VIN. If the
VIN does not match with the test vehicle’s VIN, enter the VIN manually or tap
Read to acquire the VIN again.
NOTE
Before acquiring the vehicle VIN, make sure the tablet is connected to the network in
order to get the information of the test vehicle.
Figure 6-3 Auto Detect in TPMS Application
Loading ...
Loading ...
Loading ...