Loading ...
Loading ...
Loading ...
EN
Fiorenzato | Series_00 Ed. 04/2022
21 / 49
Series
EN
5.4 Operator control panel
When the grinder-doser is switched on, after a few seconds for the system to start up,
the control panel display shows the HOME page, with all the function buttons required
to use and manage the appliance.
The management software adopted by Fiorenzato for its coffee grinder-dosers is
extremely intuitive to use. This user guide will allow you to quickly become familiar
with the function buttons and the various setting options on your new appliance. It has
touch-screen panel, which means that functional commands, menu navigation and the
setting of preferences and working parameters are carried out with a simple touch of
the fi nger on the sensitive areas of the display.
All the grinder-dosers in the
series can operate in both the WEIGHT ( automatic
weighing system enabled) dispensing mode and the TIME ( automatic weighing
system disabled) dispensing mode.
Depending on the type of operation selected, the HOME page (§5.4.1) and certain
options in the “Technical Settings” menu (see §5.4.3) will change their appearance
from display/setting of grinding parameters expressed in WEIGHT (grams) to display/
setting of the same parameters expressed in TIME (seconds). To disable or enable the
automatic weighing system, see paragraph5.4.2.
Fiorenzato | Series_00 Ed. 04/2022
22 / 49
EN
Series
5.4.1 Home page
Fig. 12 shows the HOME page with a description of the function buttons and display
fi elds. The HOME page can be customised from the “Settings menu”, therefore the
image shown in the fi gure below may differ from the screen actually displayed on your
appliance when it is fi rst switched on.
All the functions accessible from the “Settings menu” are described in the following
paragraphs.
4
2
9
10
11
13
12
6
8
5
7
1
2
2
3
14
Fig. 12 - Home page
With reference to Fig. 12, the display fi elds and function buttons on the HOME page are:
Description
1
Display fi eld for the current date and time. The data can be set by accessing
the “Date and time” screen from the settings menu (§ 5.4.3.13).
Loading ...
Loading ...
Loading ...