Loading ...
Loading ...
Loading ...
STAGEPAS 100BTR, STAGEPAS 100 Owner’s Manual
8
Controls and Functions
Front panel
1 [LEVEL] controls
Use these controls to adjust the volume for input
channels 1–3. To reduce noise, set the [LEVEL] control on
unused channels to minimum (zero).
2
[MIC/LINE] switches (input channels 1&2)
For low-level signals (including microphones), set the
switches to the MIC (N) position. For high-level signals
(including electronic musical instruments and audio
devices), set the switches to the LINE (O) position.
3 [ ] (Bluetooth) switch/LED
This switch turns the Bluetooth function on or off. It is
also used to pair (register) a Bluetooth device (page 13).
The LED indicates the following status:
NOTE
• The STAGEPAS 100 enables you to pair (register) up to eight
Bluetooth devices. Once a ninth Bluetooth device has been
paired successfully, the pairing information for the Bluetooth
device that was connected earliest will be deleted.
• Only one registered device can establish a connection at a
time. Multiple devices cannot be connected at the same time.
4 [BATTERY] LED (STAGEPAS 100BTR only)
The LED indicates the amount of remaining battery
charge or the charging status. For more information, refer
to “Charging the Built-in Battery” (page 14).
5 [POWER] LED
Lights up when the [P] (Power) switch ($) is turned on.
6 [EQ] controls
[LOW]: From the center position, turn these controls
clockwise to boost the low range, and turn them
counter-clockwise to cut the low range.
[HIGH]: From the center position, turn these controls
clockwise to boost the high range, and turn
them counter-clockwise to cut the high range.
16
2345
LED Status
Off Bluetooth off
Lit steadily (blue) Bluetooth connected
Flashing slowly Searching for a Bluetooth device
Flashing rapidly Waiting for Bluetooth pairing
Loading ...
Loading ...
Loading ...