Loading ...
Loading ...
Loading ...
STAGEPAS 100BTR, STAGEPAS 100 Owner’s Manual
13
Using the Bluetooth® Function
You can set up the STAGEPAS100 so it will play music from Bluetooth devices, such as a mobile device.
Registering (pairing) a
Bluetooth® device
Before you connect a Bluetooth device for the first time, you
need to “pair” the device. “Pairing” is a process of registering
one Bluetooth device (this product) from another Bluetooth
device (such as your smartphone).
Once pairing is complete, you will be able to reconnect those
devices easily after you terminate a Bluetooth connection.
1 Make sure that the [ ] (Bluetooth) LED is
turned off. If the LED is lit steadily or
flashing, press the [ ] (Bluetooth) switch
to disable the Bluetooth function.
2 Press and hold down the [ ] (Bluetooth)
switch for three seconds or longer.
The [ ] (Bluetooth) LED will flash rapidly, indicating
that the unit is ready for pairing.
3 Turn on the Bluetooth function on the
Bluetooth device that you want to
connect.
For more information, refer to the owner’s manual for
the Bluetooth device.
4 Once the Bluetooth device displays a list of
other Bluetooth devices that are available
for connection, select STAGEPAS100.
When the pairing process is complete, the Bluetooth
connection is established and the [ ] (Bluetooth) LED
lights up.
NOTE
• The STAGEPAS 100 enables you to pair (register) up to eight
Bluetooth devices. Once a ninth Bluetooth device has been paired
successfully, the pairing information for the Bluetooth device that
was connected earliest will be deleted.
• You must complete the pairing process on the Bluetooth device
within two minutes.
Connecting a Bluetooth® device
1 Press and hold down the [ ] (Bluetooth)
switch for one second.
The [ ] (Bluetooth) LED will flash slowly, indicating
that the unit is searching for a device.
2 Turn on the Bluetooth function on the
Bluetooth device that you want to
connect.
Once a connection is made, the [ ] (Bluetooth) LED
lights up.
If the connection is not successful, select STAGEPAS100
from the list of Bluetooth devices available for
connection.
Playing music on a Bluetooth®
device
You can play music and adjust the output volume level from
your Bluetooth device.
NOTE
• You cannot adjust the volume level using the STAGEPAS 100.
• If you receive a call or text message while playing music on a
Bluetooth device such as a smartphone, music playback might be
paused momentarily. To avoid this interruption, enable Airplane
Mode, and then set Bluetooth to ON on your Bluetooth device.
Disconnecting the Bluetooth®
device
To disconnect the Bluetooth device, do one of the following:
• Use the Bluetooth device to disconnect. (The
[ ] (Bluetooth) LED on the speaker turns off).
• Press the [ ] (Bluetooth) switch on the speaker to turn off
the Bluetooth function (the [ ] (Bluetooth) LED will turn
off.)
NOTICE
Before you turn off the power to the unit, make sure that the
Bluetooth function is turned off (the [ ] (Bluetooth) LED is
turned off). If you turn off the power to the unit while the
Bluetooth function remains enabled, the unit might lose the
pairing information.
Off
Flashing rapidly
Lit steadily
Flashing slowly
Loading ...
Loading ...
Loading ...