Loading ...
Loading ...
Loading ...
- 125 -
The problem Try this!
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
You cannot use the remote control when the TV is configuring Anynet+ or switching to the TV
viewing screen.
Use the remote control after the TV has completed the Anynet+ configuration or has switched
to the TV viewing screen.
The Anynet+ device won't
play.
You cannot use the play function when
Reset is in progress.
The connected device is
not displayed.
Check whether the device supports Anynet+.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
Check whether the HDMI cable is properly connected.
Go to
Anynet+ (HDMI-CEC) and see if Anynet+ (HDMI-CEC) has been set to On.
•
Settings General External Device Manager Anynet+ (HDMI-CEC)
Scan for Anynet+ devices again.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
Loading ...
Loading ...
Loading ...