Loading ...
Loading ...
Loading ...
Troubleshooting en
59
Fault Cause and troubleshooting
Display shows "MO-
TOR OVERLOAD".
Processing quantity is too great or processing time
was too long.
▶ Set the rotary switch to .
▶ Reduce the quantity of ingredients.
▶ Allow the appliance to cool down to room temperat-
ure.
Appliance or accessory is blocked.
▶ Set the rotary switch to .
▶ Remove the blockage.
Motor is defective.
▶ If this message keeps on appearing, contact Cus-
tomer Service.
→"Customer Service", Page61
Display shows "ARM
OPEN".
Swivel arm was opened.
1. Set the rotary switch to .
2. Move the swivel arm until it engages correctly.
Display shows
"CHECK BOWL".
Bowl or bevel gear is not fitted properly or has be-
come detached.
▶ Turn the bowl anticlockwise as far as possible.
▶ Attach the bevel gear as described in the instruc-
tions for the accessory.
Display shows "ER-
ROR" "SCALES".
1
Appliance has been moved on the work surface.
▶ Lift the appliance and set it down again.
▶ Reset the scales.
→"Resetting scales", Page52
Scales are not working properly.
▶ Reset the scales.
→"Resetting scales", Page52
Scales are defective.
▶ If this message keeps on appearing, contact Cus-
tomer Service.
→"Customer Service", Page61
Scales are exposed to vibrations.
▶ Do not use the appliance on work surfaces ex-
posed to vibrations, e.g. with a dishwasher running.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...