Loading ...
Loading ...
Loading ...
Operating the appliance en
29
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock once the
programme has started.
To activate/deactivate, press and hold
the Spin speed and Ready in buttons at
the same time for approx. 3 seconds.
The E symbol will appear on the
display panel.
■ E lit up: The childproof lock is
active.
■ E flashing: The childproof lock is
active and the programme selector
has been adjusted. To deactivate the
childproof lock, reset the
programme selector to the initial
programme. The symbol will light up
again.
Note: Do not turn the program
selector beyond the "off" position,
otherwise the programme will stop.
Note: The childproof lock remains
active after the appliance is switched
off. You must deactivate the childproof
lock whenever you want to start a new
programme.
Adding laundry
Once the programme has been started,
you can add more laundry or remove
laundry as required.
Press the Start button to do this.
The Start button indicator light will flash
and the machine will check whether it is
possible to add more laundry.
If
■ the Õ symbol goes out on the
display panel, it is possible to add
more laundry.
■ the Õ symbol lights up on the
display panel, it is not possible to
add more laundry.
To resume the programme, press the
Start button. The programme will
resume automatically.
Notes
■ Do not leave the door open for too
long when adding more laundry as
water from the laundry may leak out.
■ For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add more laundry during this time.
Changing the programme
1. Press the Start button.
2. Select a different program.
3. Press the Start button.This starts the
new program from the beginning.
Cancel the programme
For programs at high temperature:
1. Press the Start button.
2. To cool down laundry: Select Rinse.
3. Press the Start button.
For programs at low temperature:
1. Press the Start button.
2. Select Spin.
3. Press the Start button.
Programme end during rinse
hold
- - - appears in the display panel and
the indicator lamp of the Start button
flashes.
Continue the program by:
■ Pressing the Start button or
■ Selecting a spin speed or setting the
program selector to Spin and then
pressing the Start button.
Loading ...
Loading ...
Loading ...