Loading ...
Loading ...
Loading ...
Additional programme settings en
25
Ready in
(ñ, Finished in ñ, Finish in, Ready in)
Before starting the program, you can
preselect the program end time ("Ready
in" time) in hourly increments (h = hour),
up to a maximum of 24 hours.
To do this:
1. Select a program.
The program duration will be displayed
for the selected program, e.g. 2:30
(hours:minutes).
2. Press the Ready in button repeatedly
until the required number of hours is
displayed.
3. Press the Start button.
The program will now start.
The selected number of hours (e.g. 8
h) is shown on the display panel and
counts down until the wash program
starts. The duration of the program will
then be displayed.
Note: The program duration is
automatically adjusted when the program
is running.
Certain factors can affect the program
duration, e.g.:
■ Program settings,
■ Detergent dosage (additional rinse
cycles may be required due to
foaming),
■ Load size/type of fabrics (water
absorption differs),
■ Imbalances (e.g. due to fitted sheets)
are eliminated by rotating the drum
briefly several times,
■ Fluctuations in power supply,
■ Water pressure (inflow rate).
Once the program has been started, you
can change the preselected number of
hours as follows:
1. Press the Start button.
2. Use the Ready in button to change the
number of hours.
3. Press the Start button.
Once the program has been started,
you can add more laundry or remove
laundry as required. ~ Page 29
\ Additional programme
settings
Additi onal programme settings
You can find an overview of all the
possible additional settings on the
printed supplement for the installation
and operating instructions.
The settings vary depending on the
model.
Speed Eco Perfect
(G F,
Speed Eco G Perfect F,Speed/
Eco Perfect, Turbo/Eco Perfect)
Button with two possible settings for
adapting the selected program:
■ Speed Perfect
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected program,
without the Speed Eco Perfect
setting.
Note: Do not exceed the maximum
load.
■ Eco Perfect
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
program, without the Speed Eco
Perfect setting.
Press the button to do this. First of all,
you can select the Speed Perfect
setting. If you press the button again,
the Eco Perfect setting is active. The
respective symbol is shown in the
display when the setting is activated.
If you press the button again, no setting
is active.
Loading ...
Loading ...
Loading ...