Loading ...
Loading ...
Loading ...
en Programme default settings
24
0 Programme default
settings
Programme default settings
The default program settings are
displayed on the display panel once the
program has been selected.
You can change the default settings.
To do this, repeatedly press the
corresponding button until the required
setting value is displayed on the display
panel.
Note: Pressing and holding the button
will allow you to automatically scroll
through all the setting values to the last
value. Pressing it again will allow you to
change the setting values again.
You can find an overview of all possible
program settings on the supplementary
sheet for the installation and operating
instructions.
Temperature
(s, °C, Temp. °C, Temp. °C s,
Temperature)
Depending on what stage the
programme is in, you can change the
set temperature before and during the
programme.
The maximum temperature that can be
set depends on the programme that has
been selected.
Spin speed
(0, rpm 0, rpm, Spin speed)
Depending on how far through the
program the appliance is, you can
change the spin speed (in rpm –
revolutions per minute) before and
during the program.
Setting 0: No final spin; the water is
simply pumped out. The laundry stays
wet inside the drum, e.g. for items that
are not to be spun.
- - - setting: Rinse Stop = no final
spin; the laundry stays in the water after
the final rinse.
You can select "Rinse Stop" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the program has ended.
To resume/end the program
~ Page 29
The maximum speed that can be set
depends on the model and the program
that has been selected.
Loading ...
Loading ...
Loading ...