Loading ...
Loading ...
Loading ...
98
Setting Description
Sleep Mode Automatically places the projector in standby mode after an
interval of inactivity
Sleep Mode Timer Sets the time before the projector automatically turns off (Sleep
Mode must be turned on) from 1 to 30 minutes (30 minutes is
the defualt)
Illumination Turns off the status light on the projector
Trigger Out (Home Cinema 3800) Outputs a 12V DC signal (at a maximum of 200 mA) from the
3.5 mm mini-jack Trigger Out port whenever the projector is
turned on
High Altitude Mode Regulates the projector’s operating temperature at altitudes
above 4921 feet (1500 m)
Log Save Destination Sets where you want to save logs
Note: If you select Anamorphic Wide as the Trigger Out setting, voltage is only output from the Trigger
out port when the Aspect setting is set to Anamorphic Wide or Horiz. Squeeze (Home Cinema 3800).
Note: The Reset setting does not reset the Memory, Projection, High Altitude Mode, Standby Mode
or Language settings.
Parent topic: Adjusting the Menu Settings
Related references
Projector Setup and Installation Options
Related tasks
Using the Home Screen
Selecting the Language for the Projector Menus
Adjusting the Color Convergence (Panel Alignment)
Loading ...
Loading ...
Loading ...