Loading ...
Loading ...
Loading ...
EQUIPMENT IDENTIFICATION
(Please complete in full to make the technical support calls easier
)
MODEL
VOLTAGE
SERIAL NUMBER
RESELLER
INVOICE
NUMBER
PURCHASE DATE
ELECTRICAL INSTALLATION
Note:
The oven must be properly configured for optimum performance before
using it for the first time. Follow the steps listed below to set the oven operating
system to either 208V or 240V supply voltage based on the voltage being
supplied at the oven's receptacle. This configuration step is only performed on the
initial set-up and installation. The oven will not need to be configured again as long
as the supply voltage remains unchanged.
1.
Verify the supply voltage. If this knowledge is not readily available, please use a
qualified technician or individual familiar and comfortable with electricity to take
the measurements. Care must be used to avoid electrical shock. Confirm
the
electrical configuration of the receptacle conforms to the electrical
specification in the table below and written on the oven's data plate located on
the
back of the unit.
2.
Connect the oven to the power supply.
3. Press the and the simultaneously to enter the programming
screen.
4. The display will show both voltages, use the
/
to highlight the
correct choice for your application.
5.
Press the
to set the correct voltage and save the settings.
6.
Press the
to turn off the oven.
7.
The oven is now ready for use, press the to enter the warm-up mode.
15
Loading ...
Loading ...
Loading ...