Loading ...
Loading ...
Loading ...
appliance use) . A warmer ambient temperature can
increase the energy consumption.
-
Avoid opening the appliance door for any longer then
necessary
-
The lower the temperature is set the higher the energy
consumption.
-
All food stored in the appliance should be well wrapped
and covered. This prevents frost buildup.
-
Insertion of warm foods: first let the food cool down to
room temperature.
6 Use
6.1 Controls and displays
The display provides a quick overview of the temperature
setting and the status of functions and settings. You can
control the functions and settings either by deactivating/
activating them or by selecting a value.
6.1.1 Status display
Fig. 5
(1) Temperature display
The Status display shows the set temperatures and is the
home display. From there, you can navigate to the options
and settings.
6.1.2 Navigation
Navigate in the menu to access the individual functions.
An audible signal sounds after confirming a function or
setting. If no selection is made after 10 seconds the
display switches to the Status display.
The appliance is operated by swiping and confirming in
the display:
Fig. 6
Back:
-
Confirm your selection in the submenu. The display
returns to the menu.
-
Select . The display returns to the function/setting.
Back to Status display:
-
Close and open the door.
-
Wait 10 seconds. The display changes to the Status
display.
6.1.3 Display symbols
The display symbols provide information about the current
appliance status.
Symbol Appliance status
Standby
The appliance or temperature
zone is turned off.
Flashing number
Appliance is working. Tempera-
ture flashes until the set tempera-
ture is reached.
Flashing symbol
Appliance is working. Setting is
made.
6.2 Operating logic
6.2.1 Activating/deactivating settings
You can activate/deactivate the following functions:
Symbol Function
SuperFrost
x
IceMaker and MaxIce
x
PartyMode
x
EnergySaver
x
When a function is on, the appliance works harder. This
means the appliance could make louder noises and
consume more energy.
u
Swipe left in the display until the function appears.
u
Confirm selected function with a short tap.
w
You hear the confirmation tone.
w
Status appears in the menu.
w
Function is on/off.
6.2.2 Selecting function value
With the following functions you can set a value in the
submenu:
Use
* Depending on model and options 9
Loading ...
Loading ...
Loading ...