Loading ...
Loading ...
Loading ...
u
Push the rails in completely.
Drawer on molded ribs
Fig. 16
u
Pull drawer out completely.
u
Lift at the front
Fig. 16 (1)
.
u
Remove to the front
Fig. 16 (2)
.
Tilting top drawer
Fig. 17
u
Pull drawer out completely.
u
Lift at the front.
u
Lift from below.
u
Remove to the front.
7.1.2 Inserting the drawer
Drawer on telescopic rails
Drawer on glass shelf
Fig. 18
u
Slide the rails in.
u
Place the drawer on the rails at an angle.
Fig. 19
u
Lower.
u
Push all the way back.
Drawer on molded ribs
Fig. 20
u
Place drawer on the molded ribs behind the stoppers
with the drawer tiled up at the front
Fig. 20 ()
.
u
Lower drawer.
u
Slide to the rear.
Tilting top drawer
Fig. 21
u
Guide the drawer around the upper stoppers
Fig. 21 (1)
.
u
Place the drawer on the molded ribs behind the lower
stoppers with the drawer tilted up at the front
Fig. 21 (2)
.
u
Lower drawer.
u
Slide to the rear.
7.2 Pull-out board with IceTower
Fig. 22 Pull-out board with IceTower
(1) IceMaker (3) Container for pizza or
alcoholic beverages, for
example
(2) Hang-on tray for ice
cubes
(4) Pull-out board
On the pull-out board are two tall containers (IceTower).
Ice cubes from the IceMaker are collected and stored in
the container
Fig. 22 (2)
. The container
Fig. 22 (3)
is suit-
able for storing tall foodstuffs or beverages such as pizzas
or alcoholic drinks.
Equipment
16 * Depending on model and options
Loading ...
Loading ...
Loading ...